|
Price: £14.99 |
|
SKU/Item Number: CassMP3 |
|
Play your MP3’s on your car tape deck then when you reach your destination take it with you and continue listening. Housed in a standard cassette casing, this MP3 player lets you use it as a uniquely old school MP3 player, or as an interface to any car cassette or cassette player. It can also be used as an SD/MMC card reader when connected to a computer. |
|
Price: £9.99 |
|
SKU/Item Number: CAR |
|
This car MP3 player can play music from an SD card, USB flash drive or external Mp3, MP4, CD or DVD player. The player automatically starts when the 12V adapter is inserted into the car cigarette lighter or power port. And for added convenience, it comes with infrared remote control |
|
This is our current product list. Products we have in stock are available here, alternatively check out the link to TechstyleUK on Amazon
|
|
Product List Page 2 |
To Contact us e-mailsales@techstyleuk.co.uk |
 |
|
Home—About Us—Contact Us—Product List—Services List—Site Map |
|
£3.95 Flat Shipping on all orders, all locations—Worldwide |
|
Page 1 2 |
|
Price: £2.99 |
|
SKU/Item Number: WIPER |
|
Super bright blue and red LEDs make your vehicle stand out at night-light gets brighter as vehicle goes faster. Universal for all vehicles. No battery and wire needed. Includes enough for two wipers |
|
Price: £1.49 |
|
SKU/Item Number: WIND |
|
This wind powered light can be attached to your car, boat or bike and with light up as you go. The blue LED lights up when wind blows. No battery needed. Quality 3M sticker provided to ensure a secure attachment. |
|
Price: £1.99 |
|
SKU/Item Number: SMUSB |
|
This 4 Port Hub - USB 2.0 is Fully compatible with USB 2.0 & 1.1 specifications. Stylish design with Blue transparent case with green LED |
|
Price: £2.99 |
|
SKU/Item Number: PFUSB |
|
This modern look photo frame hub has ultra bright LED back light which makes your photo in the frame showing up sharply, you can change photos easily without any tools. There is no any similar products in the market which has both photo frame and Hub functions. An unique gift idea!! An unique desk decoration!! |
|
Price: £6.99 |
|
SKU/Item Number: LEDTorch |
|
These 14 LED Torches are ultra bright. Full metal construction (rubber on/off switch on end of light). Comfortable rubberized shaft in black with strap. Long lasting bulbs burn up to 100,000 hours. Great for in your vehicles and in your tool box. Small enough to fit in your pocket or purse. |
|
Price: £38.99 |
|
SKU/Item Number: SP103 |
|
This Motion Detector is a Z-WAVE™ enabled device that is fully compatible with any Z-WAVE™ Network. The Motion Detector is designed to detect movement in a protected area by detecting changes in infra-red levels. For instance when a person moves across or within the field of vision, a trigger radio signal will be transmitted. |
|
Price: £34.99 |
|
SKU/Item Number: SM103 |
|
This Door/Window Detector is a Z-WAVE™ enabled device that is fully compatible with any Z-WAVE™ Network. The Door/Window Detector is designed to detect the opening or closing of a window or door. For instance when the two pieces of the device are separated a trigger radio signal will be transmitted. |
|
Price: £54.99 |
|
SKU/Item Number: ACT ZCS201 |
|
The ZCS201 RS232 Interface allows you to communicate from any RS232 port to control Z-Wave enabled products. ACT does not provide any computer software for this product. This product is intended to be used with third party software developed using the Z-Wave dll which is available in the Z-Wave™ Developers Kit. |
|
Price: £44.99 |
|
SKU/Item Number: ACT ZRP210 |
|
The ZRP210 Plug-In Appliance Module is a component of the HomePro lighting control system. Plug the Appliance Module into a wall outlet and plug a load into the Appliance Module. Remote control of the ON/OFF of the connected load is possible the ZTH200 RF Wireless Controller (sold separately). |
|
Price: £44.99 |
|
SKU/Item Number: ACT ZDP210 |
|
The ZDP210 Plug-In Dimmer Module is a component of the HomePro lighting control system. Plug the Dimmer Module into a wall outlet and plug an incandescent lamp. Remote control of the ON/OFF and dimmer control of the lamp is possible the ZTH200 RF Wireless Controller (sold separately). |
|
Price: £74.99 |
|
SKU/Item Number: ACT ZIR010 |
|
This Motion Detector is a Z-WAVE™ enabled device that is fully compatible with any Z-WAVE™ Network. The Motion Detector is designed to detect movement in a protected area by detecting changes in infra-red levels. For instance when a person moves across or within the field of vision, a trigger radio signal will be transmitted. |
|
Price: £64.99 |
|
SKU/Item Number: AEO USB-4U |
|
The Aeon Labs Z-Wave Interface is a self-powered Z-Wave USB dongle with push button for remote network creation (independent from external power and host microprocessor). When attached to a host processor, it becomes a Z-Wave communication device, which exposes the Zensys API (SerialAPI) through integrated USB. |
|
Price: £64.99 |
|
SKU/Item Number: ACT ZCU201 |
|
The ZCU201 USB Interface allows you to communicate from any USB port to control Z-Wave enabled products. ACT does not provide any computer software for this product. This product is intended to be used with third party software developed using the Z-Wave dll which is available in the Z-Wave™ Developers Kit. |
|
Price: £64.99 |
|
SKU/Item Number: ACT ZTH200 |
|
The HomePro remote control ZTH 200 can control a variety of Z-Wave compatible devices such as switches, dimmers, window blinds and motion sensors. The ZTH 200 can include, exclude devices, group them, assign devices to scenes and set and release associations. |
|
Price: £59.99 |
|
SKU/Item Number: TRI USB-4U |
|
The Tricklestar USB Z-Wave Adapter is a self-powered Z-Wave USB dongle. The unit conveys the USB signals to a serial interface and does therefore need a device driver for this conversion function. The operating system and the Z-Wave capable home automation software recognise the device as virtual serial interface. |
